Base Shower Shelf - 300mm - Matte Black

Base Shower shelf is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back, which facilitates installation, without having to drill holes.

Base shower shelf not only creates a practical storage for your shower accessories, it also becomes a nice detail on the wall and you do not have to have the accessories on the floor.

The gap in the middle of the shelf removes water and keeps the shelf fresh. The u-shaped design creates a calm and cozy feeling in the bathroom, it also protects the products from falling down.

Installation Instructions:

1. Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.
2. Remove the protective film.
3. Apply the product by pressing it against the substrate for 10 seconds.
4. For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.

Cleaning: Use a clean, damp cloth when cleaning the product.

NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.


 

Show more

Show less

Available varieties:

/bilder/artiklar/liten/606070-41_S.jpg?m=1628751182

Show moreShow less

• Specifications

• Width:	300 mm
  Depth:	85 mm
  Height:	60 mm
  Material:	Stainless Steel
  Finish:	Matte Black
  Model:	Shelf
  Style:	Modern
  Maximum Weight:	5 kg
  Brand:	Beslag Design
• Reviews
• Care & maintenance

• Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.  

  Thoroughly clean the surface before mounting so that it is free of oil and dirt, avoid cleaning agents that contain oil. Feel free to buy our surface cleaning napkin, to make sure that the surface is properly clean during installation. Let the product sit on the selected surface for at least 24 hours before you start to use the product. 

  Installation Instructions:
  

  1. Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product. 
  2. Remove the protective film. 
  3. Apply the product by pressing it against the substrate for 10 seconds. 
  4. For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.  

  
  When it's time to clean the product, we recommend that you use a clean, damp, wrung-out cloth. Depending on the material, the product may be damaged by cleaning agents and the surface may change, therefore we recommend that you use lukewarm water.