Base 200 Towel Rail - Brushed Stainless Steel

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 towel rail is available in four different designs; Chrome, brushed stainless steel, brass and matte black.

The towel rack has two adherences, in order for the towel rack to achieve the best possible adhesive ability it is important that the surface which the towel rack is to be mounted on, is smooth. In the case that the two different adherences are to be mounted on two different tiles, it is extra important to check that the tiles are leveled.

Installation Instructions:

1. Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.
2. Remove the protective film.
3. Apply the product by pressing it against the substrate for 10 seconds.
4. For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.

Cleaning: Use a clean, damp cloth when cleaning the product.

NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.


 

Show more

Show less

Available varieties:

/bilder/artiklar/liten/606046-21_S.jpg?m=1602495390

/bilder/artiklar/liten/605230-21_S.jpg?m=1602495573

/bilder/artiklar/liten/605211-21_S.jpg?m=1602494310

Show moreShow less

• Specifications

• C/C (Distance Screw Holes):	600 mm
  Length:	645 mm
  Depth:	55 mm
  Height:	45 mm
  Material:	Stainless Steel
  Finish:	Brushed Stainless Steel
  Model:	Towel Rail
  Style:	Modern
  Maximum Weight:	Self-adhesive 3M-tape
  Other information:	Self-adhesive 3M-tape
  Brand:	Beslag Design
• Reviews
• Care & maintenance

• Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.  

  The towel rack has two adherences, in order for the towel rack to achieve the best possible adhesive ability it is important that the surface which the towel rack is to be mounted on, is smooth. In the case that the two different adherences are to be mounted on two different tiles, it is extra important to check that the tiles are leveled.

  Thoroughly clean the surface before mounting so that it is free of oil and dirt, avoid cleaning agents that contain oil. Feel free to buy our surface cleaning napkin, to make sure that the surface is properly clean during installation. Let the product sit on the selected surface for at least 24 hours before you start to use the product. 

  Installation Instructions:
  

  1. Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product. 
  2. Remove the protective film. 
  3. Apply the product by pressing it against the substrate for 10 seconds. 
  4. For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.  

  
  When it's time to clean the product, we recommend that you use a clean, damp, wrung-out cloth. Depending on the material, the product may be damaged by cleaning agents and the surface may change, therefore we recommend that you use lukewarm water.