How to install your new door handles | Pullsonline.co.uk
Sign in
Support
How to install your new door handles

How to install your new door handles

Creating a fresh, cohesive feel in your home can be as simple as changing your door handles. If you haven’t done it before, though, it can be a little tricky. That’s why we’ve put together a step-by-step guide.
Install door handles
These instructions apply only to our door handles with mounting plates, such as Helix 200, Helix 200 Stripe, Helix 200 Plain, Pipe, Nord, Tavira and Sintra.

1. Scandinavian or European standard for your door handle?

Before placing your order, it is a good idea to double-check whether your doors follow the Scandinavian or European standard. So, how can you tell? And what is the difference? - Start by looking at your existing mounting plates. If you have not had door handles with mounting plates before, or if you have a brand-new door, look at the position of the screw holes in the lock case.

A door with Scandinavian standard fits model 2014 lock cases and other lock cases with the same hole configuration. The model is usually marked on the front of the lock case (the part visible on the edge of the door). The mounting plate for the Scandinavian standard has four screw holes of the same size, arranged in a tall, narrow cross. The center-to-center measurement between the diagonally positioned screw holes is 30mm. The center-to-center measurement is the distance between the centers of the screw holes and is always given in millimeters. 


If you have a door with European standard, the screw holes are positioned parallel to the square hole in the middle of the mounting plate or lock case. The center-to-center measurement is 38mm, meaning the distance between the centers of the screw holes. Center-to-center measurements are always given in millimeters. Our mounting plates have four additional, slightly smaller holes to allow mounting in wood. 

- In short, the position of the screw holes is what distinguishes the European and Scandinavian standards.- 

So remember to check the position of the screw holes on your door to make sure you get door handles that fit. Scandinavian countries most commonly use the Scandinavian standard, while the rest of Europe uses the European standard for doors, but there can be exceptions. We therefore recommend checking which standard you need before ordering.
Diagram of mounting plates: Scandinavian standard (center-to-center 30 mm, model 2014 lock cases) and European standard (center-to-center 38 mm, with holes for wood screws)

2. Find new door handles

Once you have established which standard your doors use, it's time for the fun part: finding the right door handles for your home. Start by clicking on the menu at the top of the page and select interior door handles. Here you'll find a wide range of door handles from Beslag Design. Don't forget that you can filter by style, product type and/or color. Not sure how your door and new door handle will look together? Don't worry, we have lifestyle images showing different combinations. Take a look at the different door handles to find the one that suits your home and your style. You can also find us on Instagram and Pinterest if you'd like more inspiration.

3. Remove your old door handles

Start by removing your old door handles. You'll usually need a screwdriver and an Allen key for this.

4. Install your new door handle 

Use a screwdriver with the right head when installing the handles. The M4 screws supplied with the handles have combination heads. This means you can use either a Phillips or a flathead screwdriver. We recommend using a screwdriver to fasten the handles to avoid damaging the threads.

4.1  -  
Start by centering the supplied square spindle in the lock.
Square spindle centered in the lock in the door before the mounting plates are fitted
4.2  -  Next, place the mounting plates onto the spindle, making sure that the flat part of each mounting plate faces the floor. The mounting plates should sit flush against the door. Then screw the plates in place using the screws and sleeves provided. Tighten the screws a little at a time to avoid putting the handle under tension. Tightening one screw fully before the other can cause the handle to stick.
Mounting plate in place against the door (left) and hands pressing it onto the square spindle (right)
4.3  -  Once the mounting plates are screwed in place, remove the spindle and use it as a tool to pry out the guide plates in the centre of the mounting plates. Recycle these as metal. The guide plates are designed to make the mounting plates easier to install, but must not be left in place when the door handle is in use. 
Mounting plate being screwed to the door with a screwdriver
4.4  -  Position the spindle so that the milled groove faces away from the nearest edge of the door. This allows the grub screw in the door handle to be secured in the spindle. Centre the spindle so that it protrudes equally on both sides of the door. You can use a flat-head screwdriver to adjust its position.

4.5  -  Then press the door handles into place until they click onto the tabs at the top of the mounting plates. The door handle rose should sit flush against the door.
Door handle clicked onto the mounting plate on one side of the door
4.6 -  Now it's time to fasten the door handles. Insert the set screws using an Allen key, then tighten them. The image below shows the tightening of the set screw that secures the handle to the square spindle. – Don't forget the screw on the underside of the door handle; this set screw secures the door handle to the mounting plate.
Set screw on the door handle being tightened with an Allen key, shown from the side on the left and in close-up on the right

Enjoy your new door handles!

Sold in pairs
30
Door Handle Helix 200 Stripe - Brass
Door Handle Helix 200 Stripe - Brass
Door Handle Helix 200 Stripe - Brass

From

£84.42

From

£120.60
Soon in stock
Sold in pairs
30
Door Handle Tavira - Stainless Steel Finish
Door Handle Tavira - Stainless Steel Finish
Door Handle Tavira - Stainless Steel Finish

From

£84.42

From

£120.60
In stock
Sold in pairs
30
POPULAR
Door Handle Helix 200 - Black
Door Handle Helix 200 - Black
Door Handle Helix 200 - Black

From

£84.42

From

£120.60
In stock
Sold in pairs
30
Door Handle Helix 200 Plain - Stainless Steel Finish
Door Handle Helix 200 Plain - Stainless Steel Finish
Door Handle Helix 200 Plain - Stainless Steel Finish
£87.22 £124.60
In stock
Sold in pairs
30
Door Handle Helix 200 Stripe - Antique Bronze
Door Handle Helix 200 Stripe - Antique Bronze
Door Handle Helix 200 Stripe - Antique Bronze

From

£84.42

From

£120.60
In stock
Sold in pairs
30
Door Handle Tavira - Black
Door Handle Tavira - Black
Door Handle Tavira - Black

From

£84.42

From

£120.60
In stock

Last updated: 2026-11-18

Published on: 2021-08-25

Select country
  • 2-4 days delivery
  • 60 days open buy
  • Secure payments
Visa Mastercard Klarna American Express Google Pay Apple Pay
Update

Lowest price in the last 30 days:

NOTE! The price is the lowest price applied to the product during the 30 days prior to the current price reduction.